Ricoh FT8880 Service Manual page 92

5 June 1992
13.8 VACUUM SHUTTER SOLENOID ADJUSTMENT
1. Remove the feed-in belt unit.
2. Loosen the 2 screws [A].
3. Maintain the 0.5 mm gap (as shown) and adjust the solenoid bracket
position so that the shutter [B] closes completely when the plunger [C] is
pushed in the solenoid. Then, re-tighten the 2 screws.
0.5 mm
[C]
5-9
[A]
[B]
RDH