Ricoh FT8880 Service Manual page 151

REPLACEMENT AND ADJUSTMENT
5.6 EXIT ROLLER REPLACEMENT
[F]
[E]
1. Remove the upper cover, front door, front shift cover, rear cover, and
right upper cover.
2. Remove the screw [A], spring [B], bushing [C], and pulley [D].
3. Remove the 4 screws [E] fixing the lower exit guide plate [F].
4. Remove the 2 E-rings [G] and remove the exit roller assembly [H].
5. Remove the E-rings [I], pins [J] and replace the exit rollers [K].
NOTE: Do not lose the pins [J].
[J]
[G]
32
[D]
[E]
[H]
[I]
[K]
5 June 1992
[B] [A]
[C]
[G]