Ricoh FT8880 Service Manual page 134

5 June 1992 SECTIONAL DESCRIPTION
2.8 FEED-OUT TO SHIFT TRAY
[B]
[A]
[C]
[B]
[D]
After being stapled, the stack feed out motor [A] starts rotating. The pawl [B]
on the lift belt [C] transports the set of stapled copies up, and feeds it to the
shift tray. Approximately 0.6 second after the stack feed out motor starts, the
motor stops for 400ms. At this moment, the exit rollers catch the stapled
copies to feed them out to the shift tray. Then the motor rotates again until
the pawl actuates its home position sensor [D].
15