Ricoh FT8880 Service Manual page 15

RDH 5 June 1992
16.1.2 Inversion Original Cycle
[B]
[C]
[A]
[B]
Until the original reaches to the inverter section [A], the sequence is the same
as for no inversion original cycle. The inverter rollers [B] rotate in the original
exit direction. The original is now inverted and exited to the original table [C].
This continues until all originals have been inverted. The inverted originals
are then fed from the original table for copying of the reverse side. The
sequence is the same as for the front side copying. The originals return and
are stacked on the original table where they wait for the next copy cycle.
2-4