Clearing (#12 Clear); Rom Indication (#13 Rom); Resetting The Contact Sensor Position (#14 Cs Set) - Canon iR1200 Series Service Manual

CHAPTER 2 USING THE MACHINE

3.17 Clearing (#12 CLEAR)

Item Level 2 item
TEL & USER
DATA
USER DATA
SERVICE SW
SERVICE DATA
REPORT ACTIVITY
JAM
ERR
ALARM
COUNTER
CARD
ERR
ALL

3.18 ROM Indication (#13 ROM)

The following is a list of the items/particulars for ROM indication mode:
Item Description
MAIN Use it to indicate the version of the ROM on the image processor PCB.
MAIN2 Use it to indicate the version of the CPU on the image processor PCB.
ECONT Use it to indicate the version of the ROM on the DC controller PCB.
PDL Use it to indicate the version of the ROM on the printer controller PCB.

3.19 Resetting the Contact Sensor Position (#14 CS SET)

Not used.
2-62
COPYRIGHT © 2002 CANON INC.
Description
Use it to clear all areas under user registration/setting.
Use it to clear the tel registration data
*
One-touch dial, speed dial, and group dial numbers.
Use it to clear user data. SSSW and TEL registration data are not
cleared.
Use it to clear the settings under SSSW. The user data is not
cleared.
Use it to clear the counters (numerator), date, and start data form
the system dump list.
Use it to clear the contents of the communications control report.
not used.
not used.
not used.
Use it clear the counter data.
not used.
not used.
Use it to clear all settings/registration data excluding the counter
readings (denominator, numerator) from the system dump list
and #5.
2000 2000 2000 2000
* and user data.
CANON iR1200/iR1300 Series REV. 0 AUG. 2002