Pull-In Lower Roller; Registration Lower Roller - Canon imageFORMULA DR-G2140 Service Manual

10. Pull-in Lower Roller

1) Remove the right and left covers.
(Page 3-3), (Page 3-5)
2) Remove the lower entrance guide.
(Page 3-31)
3) Remove the left front belt,
(Page 3-32)
4) For the pull-in lower roller

stopper 2 , pulley
side. And remove the stopper
right side, and bearing
And remove the roller.
Note: Do not lose the pin.
Figure 3-614
COPYRIGHT © CANON ELECTRONICS INC. 2018

1 , remove the
 
3 and pin 4 on the left

4 on the

5 on each side.
CANON DR-G2140/G2110/G2090 FIRST EDITION
CHAPTER 3 DISASSEMBLY & REASSEMBLY

11. Registration Lower Roller

1) Remove the right and left covers.
(Page 3-3), (Page 3-5)
2) Remove the right belt and left front belt.
(Page 3-31), (Page 3-32)
3) Remove the lower entrance guide.
(Page 3-31)
4) Remove 2 screws
and remove the lower feed guide
Figure 3-615
5) For the registration lower roller

the stopper , pulley
2
each side. And remove the bearing
each side. And remove the roller.
Note: Do not lose the pin.

1 (M3, stepped 3.2) ,

2 .

, remove
1
 
and pin
3 4

5
3-33
on
on