Inspection - Suzuki VZ800 Service Manual

• Remove the bearings with the special tool.
 09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise condition, bearing removal is not
necessary.

The removed bearing must be replaced with a new
one.
• Remove the mechanical seal with the special tool.
 09921-20240: Bearing remover set
NOTE:
If there is no abnormal condition, the mechanical seal removal is
not necessary.

The removed mechanical seal must be replaced with a
new one.
• Remove the oil seal using a suitable bar.
NOTE:
If no abnormal, the oil seal removal is not necessary.

The removed oil seal must be replaced with a new one.

INSPECTION

BEARING
• Inspect the play of the bearing by hand while it is in the water
pump case.
• Rotate the inner race by hand to inspect for abnormal noise
and smooth rotation.
• Replace the bearing if there is anything unusual.
MECHANICAL SEAL
• Visually inspect the mechanical seal for damage, with particu-
lar attention given to the sealing face.
• Replace the mechanical seal that shows indications of leak-
age. Also replace the seal ring if necessary.
COOLING AND LUBRICATION SYSTEM 7-15