Automatic Clutch Inspection; Initial Engagement - Suzuki UG110 2021 Service Manual

AUTOMATIC CLUTCH INSPECTION

The UG110 is equipped with a centrifugal type automatic clutch
and a variable ratio belt drive transmission.
To insure proper performance and longevity of the clutch as-
sembly it is essential that the clutch assembly engages smoothly
and gradually. Two inspection checks must be performed to thor-
oughly check the operation of the drive train. Follow the proce-
dures listed.
NOTE:
Warm up the engine.

INITIAL ENGAGEMENT

• Connect the multi circuit tester to the high-tension cord.
• Start the engine.
• While seated on the machine, slowly increase the engine speed
and record the speed (r/min) when the machine begins to move
forward.
2 09900-25008: Multi circuit tester set
4 Engagement speed (r/min)
2 800 – 3 400 r/min
If the engagement speed does not coincide with the standard
range, inspect the following items for any abnormality.
* Clutch shoe/movable driven face ........ 73-20 to -24
PERIODIC MAINTENANCE 2-15