Suzuki VZ800 Service Manual page 101

STARTER CLUTCH INSPECTION
Install the starter driven gear onto the starter clutch and turn the
starter driven gear by hand to inspect the starter clutch for a
smooth movement. The gear turns one direction only. If a large
resistance is felt to rotation, inspect the starter clutch for dam-
age or inspect the starter clutch contacting surface of the starter
driven gear for wear or damage.
If they are found to be damaged, replace them with new ones.
STARTER DRIVEN GEAR BEARING INSPECTION
Inspect the starter driven gear bearing for any damages.
STARTER CLUTCH SERVICING
• Hold the rotor with off-set wrench and remove the starter
clutch securing bolts.
• Remove the one way clutch 1 and guide 2 from the rotor 3.
• When fitting the one way clutch 1 to the guide 2, position
flange side A of one way clutch to the rotor side.
ENGINE 3-55