Suzuki VZ800 Service Manual page 120

3-74 ENGINE
• Install the gearshift return spring properly.
• Install the gearshift shaft with the center of shift gear on the
shaft aligned the center of gearshift cam driven gear.
OIL PUMP
• Install the oil pump.
 Oil pump mounting bolt: 11 N·m (1.1 kgf-m, 8 lb-ft)
NOTE:
Set the oil pump shaft end A to the water pump shaft B.
• Install the washer 1 and pin 2.
• Install the oil pump driven gear and the snap ring.
 09900-06107: Snap ring pliers
CLUTCH
• Install the spacer 1 and the thrust washer 2.
• Engage the chain with the oil pump drive gear.