Suzuki VZ800 Service Manual page 95

Bearing thickness
Color (Part No.)
Green
(12229-39G00-0A0)
Black
(12229-39G00-0B0)
Brown
(12229-39G00-0C0)

Bearing must be replaced as a set.
CRANKSHAFT JOURNAL BEARING REPLACEMENT
Use the special tool to replace the crankshaft journal bearings.
The replacement procedure is as follows:
 09913-60230: Journal bearing remover/installer
• Set the special tool as shown to remove the crankshaft journal
bearings.
NOTE:
Remove the crankshaft journal bearings in only one direction,
from inside to outside of each crankcase half.
• Gradually press out the bearing with the special tool by using
the hand-press.

The removed bearings must be replaced with new
ones.
Thickness
2.006 – 2.009 mm
(0.0789 – 0.0790 in)
2.009 – 2.012 mm
(0.0790 – 0.0792 in)
2.012 – 2.015 mm
(0.0792 – 0.0793 in)
Hand-press
Crankcase
ENGINE 3-49
Color code
Bearing