Suzuki VZ800 Service Manual page 277

• Install the new mechanical seal using a suitable size socket
wrench.
NOTE:
On the new mechanical seal, the sealer A has been applied.
• Install the new bearings with the special tool.
 09913-70210: Bearing installer set
NOTE:
The stamped mark on the bearing faces crankcase side.
• Apply SUZUKI SUPER GREASE "A" to the impeller shaft.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Install the impeller shaft to the water pump body.
• Install the rubber seal 1 into the impeller.
• After wiping off the oily or greasy matter from the mechanical
seal ring, install it into the impeller.
NOTE:
The marked side B of the mechanical seal ring faces the impel-
ler.
COOLING AND LUBRICATION SYSTEM 7-17