Suzuki VZ800 Service Manual page 340

8-60 CHASSIS
• When remounting the master cylinder onto the handlebars,
align the master cylinder holder's mating surface 1 with the
punch mark 2 on the handlebars and tighten the upper clamp
bolt first.
 Master cylinder mount bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Tighten the brake hose union bolt to the specified torque.
• For assembly procedure of brake hose. (10-21)
 Brake hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)

Bleed air from the brake system after installing the
master cylinder. (2-22)
Master cylinder
Handlebar
Upper
clamp
bolt
Punched
mark
Clearance