Suzuki VZ800 Service Manual page 117

• Install the starter driven gear to the rotor.
• Install the generator rotor assembly and tighten its bolt to the
specified torque.
 Generator rotor bolt: 160 N·m (16.0 kgf-m, 115.5 lb-ft)
• Install the starter driven gear and the idle gear.
• Install the new gasket 3 and dowel pins.
• Install the generator cover.
NOTE:
Fit the new gaskets to the bolts A.
NEUTRAL SWITCH
• Install the springs 1 and switch contacts 2.
NOTE:
Apply grease to the O-ring.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
ENGINE 3-71