5-22 FI SYSTEM
MOTORCYCLE/ENVIRONMENTAL CONDITION WHEN PROBLEM OCCURS
Weather
Fair
Temperature
Hot
Frequency
Always
Under certain condition
Road
Urban
Tarmacadam
Engine condition
Cold
Immediately after start
Motorcycle con-
During driving:
dition
Right hand corner
At stop
Other
NOTE:
The above form is a standard sample. The form should be modified according to conditions and characteris-
tics of each market.
VISUAL INSPECTION
• Prior to diagnosis using the mode select switch or SDS, perform the following visual inspections. The rea-
son for visual inspection is that mechanical failures (such as oil leakage) cannot be displayed on the
screen with the use of mode select switch or SDS.
* Engine oil level and leakage (2-11)
* Fuel level and leakage (2-10)
* Clogged air cleaner element (2-4)
* Battery condition (9-37)
* Throttle cable play (2-14)
* Vacuum hoses looseness, bend and disconnection
* Broken fuse
* FI light operation (5-16 and 9-29)
* Each warning light operation (9-29)
* Speedometer operation (9-31)
* Exhaust gas leakage and noise (2-24)
* Each coupler disconnection
* Clogged radiator core (7-5)
* Engine coolant level and leakage. (7-6)
Environmental condition
Cloudy
Rain
Snow
Warm
Cool
Cold (
Sometimes (
times/
Suburb
Highway
Gravel
Other
Motorcycle condition
Warming up phase
Racing without load
Constant speed
Left hand corner
Motorcycle speed when problem occurs (
Always
Other
°C/
°F)
Always
day, month)
Mountainous (
Uphill
Warmed up
Always
Engine speed (
Accelerating
Decelerating
Only once
Downhill)
Other at starting
r/min)
km/h,
mile/h)