Suzuki VZ800 Service Manual page 115

• Tighten the secondary driven bevel gear bolt to the specified
torque.
NOTE:
* Hollow portion E of the secondary driven gear assembly faces
inside.
* Apply a small quantity of THREAD LOCK SUPER "1303" to the
bolt.
 99000-32030: THREAD LOCK SUPER "1303"
 Secondary driven bevel gear bolt:
DRIVESHAFT BOLT/SECONDARY DRIVEN GEAR SHAFT
NUT
• Install the universal joint on the secondary driven gear shaft.
• While holding the universal joint with a adjustable wrench,
tighten the secondary drive gear shaft nut 1 and driveshaft
bolt 2 to the specified torque.

Driveshaft bolt 2 has left-hand thread.
 Secondary drive gear shaft nut:
Driveshaft bolt: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
WATER PUMP
• Install the new O-ring and new gasket.
• Tighten the water pump mounting screws.

Use the new O-ring to prevent oil leakage.
NOTE:
Apply grease to the O-ring.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
23 N·m (2.3 kgf-m, 16.5 lb-ft)
105 N·m (10.5 kgf-m, 76.0 lb-ft)
ENGINE 3-69