Suzuki VZ800 Service Manual page 328

8-48 CHASSIS
• Apply Lithium Base Molybdenum grease (NLGI #2) to the pro-
peller shaft spline.
NOTE:
To install the final gear case easily, move the dust boot front and
the universal joint back. Engage the universal joint to the propel-
ler shaft first and then engage it to the secondary driven bevel
gear shaft.
• Tighten the final gear case mounting nuts to the specified
torque.
 Final gear case nut: 40 N·m (4.0 kgf-m, 29.0 lb-ft)
• Install the rear wheel. (8-37)
• Install the exhaust pipes and mufflers. (3-10)