Cautions In Servicing; Connector; Coupler; Clamp - Suzuki VZ800 Service Manual

CAUTIONS IN SERVICING

CONNECTOR

• When connecting a connector, be sure to push it in until a
click is felt.
• Inspect the connector for corrosion, contamination and break-
age in its cover.

COUPLER

• With a lock type coupler, be sure to release the lock before
disconnecting and push it in fully till the lock works when con-
necting.
• When disconnecting the coupler, be sure to hold the coupler
itself and do not pull the lead wires.
• Inspect each terminal on the coupler for being loose or bent.
• Inspect each terminal for corrosion and contamination.

CLAMP

• Clamp the wire harness at such positions as indicated in
"WIRE HARNESS ROUTING". (10-15 to -16)
• Bend the clamp properly so that the wire harness is clamped
securely.
• In clamping the wire harness, use care not to allow it to hang
down.
• Do not use wire or any other substitute for the band type
clamp.

FUSE

• When a fuse blows, always investigate the cause, correct it
and then replace the fuse.
• Do not use a fuse of a different capacity.
• Do not use wire or any other substitute for the fuse.
ELECTRICAL SYSTEM 9-3
Click
Click
CORRECT INCORRECT