Reassembly Remounting - Suzuki VZ800 Service Manual

• Remove the cotter pins.

REASSEMBLY REMOUNTING

Reassemble and remount the rear brake rod in the reverse
order of removal and disassembly. Pay attention to the following
points.
• Apply grease to the rear brake link pivot bolt and tighten it to
the specified torque.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
 Rear brake link pivot bolt: 29 N·m (2.9 kgf-m, 21 lb-ft)
• Apply grease to the rear brake pedal shaft.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Tighten the rear brake pedal mount bolt to the specified
torque.
 Rear brake pedal mount bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
NOTE:
* When remounting the rear brake pedal onto the rear brake
pedal shaft, align the rear brake pedal mounting surface A
with the punch mark B.
* After remounting the rear wheel, check for proper brake opera-
tion. (2-21)
• Install the exhaust pipes and mufflers. (3-10)
CHASSIS 8-65