Suzuki VZ800 Service Manual page 129

• Apply SUZUKI BOND "1216B" to the mating surface of the
cylinder head cover.
• Fit the camshaft end caps 1.
• Apply grease to the new O-ring 2 and install it. (Front cylin-
der only)
99000-31230: SUZUKI BOND "1216B"
1216
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
FWD
• Lightly tighten the cylinder head cover bolts diagonally, and
then if everything is satisfactory, tighten securely with a
torque wrench to the specified torque.
 Cylinder head cover bolt
(M6): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
(M8): 25 N·m (2.5 kgf-m, 18.0 lb-ft)
NOTE:
When tightening the cylinder head cover bolts, the piston must
be at top dead center on the compression stroke.
(3-12 and -13)
FRONT
1216
ENGINE 3-83
1216
REAR