Suzuki VZ800 Service Manual page 67

PRIMARY DRIVE GEAR
• Remove the primary drive gear by removing the primary drive
gear bolt with the special tool.
 09930-40113: Rotor holder

This bolt has left-hand thread.
Turning it counter-clockwise may cause damage.
• Remove the cam chain tensioner 1, washers, spacer 2 and
the chain 3.
• Remove the cam chain drive sprocket 4 and the thrust
washer 5.
OIL FILTER
• Remove the oil filter with the special tool.
 09915-40610: Oil filter wrench
DRIVESHAFT BOLT/SECONDARY DRIVEN GEAR SHAFT
NUT
• Install the universal joint on the secondary driven gear shaft.
• While holding the universal joint with an adjustable wrench,
remove the driveshaft bolt 1, thrust washer 2, secondary
drive gear shaft nut 3 and the thrust washer 4.

The driveshaft bolt 1 has left-hand thread.
Turning it counter-clockwise may cause damage.
ENGINE 3-21