Monitoring the NXA-ENET8-2POE
DHCP Relay Statistics parameters (Cont.)
Client Statistics
• Transmit to Client
• Transmit Error
• Receive from
Client
• Receive Agent
Option
• Replace Agent
Option
• Keep Agent
Option
• Drop Agent Option The number of packets that were dropped because they already contained relay
Displaying Mac Address Bindings for ARP Packets
Open the Dynamic ARP Inspection Table (click Monitor, Security, Network, ARP Inspection) to display
address entries sorted first by port, then VLAN ID, MAC address, and finally IP address.
FIG. 129
Dynamic ARP Inspection Table
Each page shows up to 999 entries from the Dynamic ARP Inspection table, default being 20, selected through
the "entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the Dynamic ARP Inspection Table.
Displaying Entries In the IP Source Guard Table
Open the Dynamic IP Source Guard Table (click Monitor, Security, Network, IP Source Guard) to display
entries sorted first by port, then VLAN ID, MAC address, and finally IP address.
FIG. 130
Dynamic IP Source Guard Table
Each page shows up to 999 entries from the Dynamic IP Source Guard table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries from
the beginning of the Dynamic IP Source Guard Table.
158
The number of packets that were relayed from the server to a client.
The number of packets containing errors that were sent to servers.
The number of packets received from clients.
The number of packets received where the switch.
The number of packets received where the DHCP client packet information was
replaced with the switch's relay information.
The number of packets received where the DHCP client packet information was
retained.
information.
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch