Download Print this page
AMX NXF NetLinx CardFrame FG2001 Installation Manual
AMX NXF NetLinx CardFrame FG2001 Installation Manual

AMX NXF NetLinx CardFrame FG2001 Installation Manual

Netlinx cardframe

Advertisement

Quick Links

Overview
The NXF CardFrame (FG2001) accommodates a NetLinx Master (or Hub) card,
up to twelve NetLinx Control cards, and provides a back plane to distribute
power and data to/from the cards (FIG. 1).
FIG. 1
NXF CardFrame - front panel (with faceplate)
The NXF CardFrame provides terminals on the rear panel for connection to the
control cards, and to a system power supply. A DIP switch on the rear panel sets
the CardFrame's base device number. For detailed product information on the
NXF CardFrame, and the NetLinx Control Cards, refer to the NetLinx
CardFrame, Control Cards, and NetModules Instruction Manual on-line at
www.amx.com.
Front/Rear Panel Components
FIG. 2 shows the front and rear panel components of the NXF CardFrame:
Control Card connectors (20-pin male) 1-12
Front
1
Master/Hub Card slot
1
12
11
10
9
8
7
6
1
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
19
19
19
19
19
19
19
19
20
20
20
20
12
11
10
9
8
7
6
Control Card slots (1-12)
PWR (power) connector (2-pin male)
CardFrame Number (device ID) DIP switch
FIG. 2
NXF CardFrame - Front/Rear Panel Components
Specifications
Dimensions
3.5" x 17.0" x 9.6" (8.90 cm x 43.20 cm x 22.50 cm)
(HWD):
Weight:
9.1 lbs. (4.1 kg)
Power
+12 VDC
Requirement:
Master/Hub Card Slot
The Master/Hub Card slot houses a NetLinx Master or Hub Card. The card
mounts in a horizontal position, through the master card slot on the rear panel of
the NXF enclosure. To install a Master or Hub Card in an NXF:
1.
Discharge the static electricity from your body by touching a grounded
object.
2.
Disconnect the power, and unplug all connectors from the NXF.
3.
Remove the two screws that hold the front plate on the Master Card, and
remove the front plate.
4.
Align the edges of the card with the guide slots inside the Master Card slot
on the NXF.
5.
Slide the card about halfway into the slot.
6.
Inside the Master Card slot on NXF, locate the 4-pin control cable
connector.
7.
Plug the connector from the NXF into the 4-pin terminal on the Master
Card. This connector is keyed to ensure correct orientation.
8.
Once the control cable is connected, gently slide the card all the way in
until you can screw the card in place.
9.
Re-apply power and other connections as necessary.
2
3
4
5
6
7
8
9
10
2
3
4
5
6
7
8
9
10
5
4
3
2
1
12VDC
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
CA RDFRAME
6
6
6
6
P WR
7
7
7
7
8
8
8
8
Master/Hub
9
9
9
9
10
10
10
10
11
11
11
11
12
12
12
12
Card slot
13
13
13
13
14
14
14
14
15
15
15
15
16
16
16
16
17
17
17
17
18
18
18
18
19
19
19
19
20
20
5
4
3
2
1
Compatible NetLinx Master Cards
For use as a master controller, the NXF CardFrame accepts the following
NetLinx Master Card:
NetLinx Master Card
NXC-ME260
Compatible NetLinx Hub Cards
For use as a hub device, the NXF CardFrame accepts the following NetLinx Hub
Cards:
NetLinx Hub Cards
NXC-NH
NXC-HS
NXC-HE
Control Card Connectors
1.
12 card slots for the NXC Control Cards that control devices connected to
the CardFrame. To install NXC Control Cards in the NXF CardFrame:
2.
Remove the magnetic front faceplate/viewing window from the
CardFrame.
3.
Align the edge of the Control Card with a slot in the CardFrame. Slide the
card into the CardFrame and press until you feel the Card seat in the back-
11
12
plane connector.
4.
Put the magnetic faceplate back on the CardFrame. Secure with mounting
screws (if necessary).
Compatible NXC Control Cards:
11
12
The NXF CardFrame accepts the following NetLinx Control Cards:
NXF
CARDFRAME NUMBER
CAR DFRAME
NetLinx Control Cards
O N
NXC-COM2
NXC-I/O10
NXC-IRS4
NXC-REL10
Rear
NXC-VAI4
NXC-VOL4
+12 VDC PWR Connector:
On the rear panel. the 2-pin green (male) connector is for connecting a 12 VDC
power supply. The CardFrame can be powered either via the Master Card
(default), or by an external power supply connected to the CardFrame's PWR
connector. If a power supply is connected to the PWR connector, the CardFrame
power automatically switches to the connected power supply. In that case, the
Master/Hub Card and CardFrame are independently powered.
CardFrame Number DIP Switch:
The 8-position CardFrame Number DIP switch, located on the rear of the
CardFrame (FIG. 3), sets the starting address (the device number in the D:P:S
specification) for the Control Cards you install into the CardFrame. The address
range is 12-3060.
1
12VDC
CARDFRAME
PWR
NXC-ME260
Master-Ethernet
12VDC
PWR
1
FIG. 3
CardFrame Number DIP switch (8-position)
Installation Guide
NXF
NetLinx
Master-Ethernet Card/Module
ICSNet Hub Card (FG2060)
ICSHub Server Card (FG2061)
ICSHub Expander Card (FG2062)
Dual COM Port Control Card (FG2022)
Input/Output Control Card (FG2021)
4-Port IR/S Control Card (FG2023)
Relay Control Card (FG2020)
Analog Voltage Control Card (FG2025)
Volume Control Card (FG2024)
CARDFRAME NUMBER
ON
ETHERNET
10/100
SPEED
FD
AXlink
PROGRAM
ICSNet
ICSHub
CardFrame
®
NXF
NXF
CardFrame
CARDFRAME
Number
DIP switch
IN
OUT

Advertisement

loading
Need help?

Need help?

Do you have a question about the NXF NetLinx CardFrame FG2001 and is the answer not in the manual?

Questions and answers

Summary of Contents for AMX NXF NetLinx CardFrame FG2001

  • Page 1 CardFrame's base device number. For detailed product information on the NXF CardFrame, and the NetLinx Control Cards, refer to the NetLinx CardFrame, Control Cards, and NetModules Instruction Manual on-line at www.amx.com. Front/Rear Panel Components FIG. 2 shows the front and rear panel components of the NXF CardFrame:...
  • Page 2 ©2009 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com Device:Port:System (D:P:S) A device is any hardware component that can be connected to an AXLink or NetLinx (ICSNet) bus.

This manual is also suitable for:

Nxf