Displaying Mvr Group Information; Showing Igmp Snooping Information; Showing Igmp Snooping Status - AMX NXA-ENET8-2POE Operation/Reference Manual

Gigabit ethernet layer 2 poe switch
Hide thumbs Also See for NXA-ENET8-2POE:
Table of Contents

Advertisement

Monitoring the NXA-ENET8-2POE

Displaying MVR Group Information

Use the MVR Group Information page (click Monitor, MVR, Group Information.) to display statistics for
IGMP protocol messages used by MVR; and to shows information about the interfaces associated with
multicast groups assigned to the MVR VLAN.
FIG. 143
MVR Group Information
MVR Group Information parameters
Statistics
• VLAN ID
• V1 Reports
Received
• V2 Reports
Received
• V3 Reports
Received
• V2 Leaves
Received
Multicast Groups
• VLAN ID
• Groups
• Port Members

Showing IGMP Snooping Information

Use the IGMP Snooping pages to display IGMP snooping statistics, port members of each service group, and
information on source-specific groups.

Showing IGMP Snooping Status

Use the IGMP Snooping Status page (click Monitor, IGMP Snooping, Status) to display IGMP querier
status, snooping statistics for each VLAN carrying IGMP traffic, and the ports connected to an upstream
multicast router/switch.
FIG. 144
IGMP Snooping Status
168
Identifier of the VLAN that serves as the channel for streaming multicast services
using MVR.
The number of IGMP V1 reports received.
The number of IGMP V2 reports received.
The number of IGMP V3 reports received.
The number of IGMP V2 leaves received.
Identifier of the VLAN that serves as the channel for streaming multicast services
using MVR.
The present multicast groups. A maximum of 128 groups are allowed in the multi-
cast VLAN.
The ports that are members of the entry.
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch

Advertisement

Table of Contents
loading

Table of Contents