Displaying Cpu Utilization; Displaying Log Messages - AMX NXA-ENET8-2POE Operation/Reference Manual

Monitoring the NXA-ENET8-2POE

Displaying CPU Utilization

Use the CPU Load page to display information on CPU utilization.
FIG. 112 CPU Load
The load is averaged over the last 100ms, 1sec and 10 seconds intervals.
The last 120 samples are graphed.
In order to display the graph, your browser must support the Scalable Vector Graphics format. Consult SVG
Wiki for more information on browser support. Depending on your browser version, Microsoft Internet
Explorer will need to have a plugin installed to support SVG.
1.
Click System, then CPU Load.

Displaying Log Messages

Use the System Log Information page to scroll through the logged system and event messages.
FIG. 113
System Log Information
System Log Information parameters
Display Filter
• Level
• Start from ID
144
Specifies the type of log messages to display.
Info - Informational messages only.
Warning - Warning conditions.
Error - Error conditions.
All - All levels.
The error ID from which to start the display.
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch