Monitoring the NXA-ENET8-2POE
Overview
This chapter describes how to monitor all of the basic functions, configure or view system logs, and how to
view traffic status or the address table.
Displaying Basic Information About the System
You can use the Monitor/System menu to display a basic description of the switch, log messages, or statistics
on traffic used in managing the switch.
Displaying System Information
Use the System Information page to identify the system by displaying the device name, location and contact
information.
FIG. 111
System Information
System Information parameters
System
• Contact
• Name
• Location
Hardware
• Chip ID
• MAC Address
Time
• System Date
• System Uptime
Software
• Software Version
• Software Date
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch
To configure the following items see the Configuring System Information section
on page 39.
Administrator responsible for the system.
Name assigned to the switch system.
Specifies the system location.
The vendor ID for the switch ASIC.
The physical layer address for this switch.
The current system time and date. The time is obtained through an SNTP Server
if configured (see the Setting an IP Address section on page 40.
Length of time the management agent has been up.
Version number of runtime code.
Release date of the switch software.
Monitoring the NXA-ENET8-2POE
143