Showing Igmp Snooping Group Information - AMX NXA-ENET8-2POE Operation/Reference Manual

IGMP Snooping Status parameters
Statistics
• VLAN ID
• Querier Version
• Host Version
• Querier Status
• Querier
Transmitted
• Querier Received
• V1 Reports
Received
• V2 Reports
Received
• V3 Reports
Received
• V2 Leaves
Received
Router Port
• Port
• Status

Showing IGMP Snooping Group Information

Use the IGMP Snooping Group Information page (click Monitor, IGMP Snooping, Group Information) to
display the port members of each service group.
FIG. 145 IGMP Snooping Group Information
IGMP Snooping Group Information parameters
• VLAN ID
• Groups
• Port Members
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch
VLAN Identifier.
IGMP version used by the switch when serving as the IGMP querier.
IGMP version used when used by this switch when serving as a host in IGMP
proxy mode.
Shows the Querier status as ACTIVE or IDLE. When enabled, the switch can
serve as the Querier, which is responsible for asking hosts if they want to receive
multicast traffic.
The number of transmitted Querier messages.
The number of received Querier messages.
The number of received IGMP Version 1 reports.
The number of received IGMP Version 2 reports.
The number of received IGMP Version 3 reports.
The number of received IGMP Version 2 leave reports.
Port Identifier.
Ports connected to multicast routers may be dynamically discovered by this switch
or statically assigned to an interface on this switch.
VLAN Identifier.
The IP address for a specific multicast service.
The ports assigned to the listed VLAN which propagate a specific multicast ser-
vice.
Monitoring the NXA-ENET8-2POE
169