Locating The Ip Address Of The Presentation Switcher; Global Settings - AMX Enova DVX-2100HD Operation/Reference Manual

Audio/Video Configuration
If a web browser or Flash Player is not available, the presentation switcher's front panel and NetLinx
commands provide equivalent controls for audio/video configuration. See the Using the Front Panel
Buttons section on page 41 for more information.

Locating the IP Address of the Presentation Switcher

You can locate the IP address of the presentation switcher by using the buttons on the front panel of the
presentation switcher. The IP address appears on the LCD display on the front panel of the presentation
switcher. Perform these steps to locate the IP address of the unit:
1.
Simultaneously press the Video Menu and Audio Menu buttons. The Tools menu appears on the LCD
display.
2.
Use the UP and DOWN navigational arrow buttons to navigate through the options until you locate the
presentation switcher's IP address. Note the IP address for future reference.
You can use the Tools Menu to verify current TCP/IP settings using the UP and
DOWN navigational buttons.

Global Settings

The WebConsole Configuration page contains settings that appear on each tab and apply globally. FIG. 53
indicates the global options available on this page.
Restore Factory Defaults
FIG. 53
WebConsole Configuration page
50
Refresh
Enova DVX-2100HD 6x2 All-in-One Presentation Switcher Operation/Reference Guide
Global volume and Mute