Locating The Ip Address Of The Dvx; General Options - AMX Enova DVX-3150HD Operation/Reference Manual

Audio/Video Configuration

Locating the IP Address of the DVX

You can locate the IP address of the DVX by using the buttons on the front panel of the unit. The IP address
appears on the LCD display on the front panel of the DVX. Perform these steps to locate the IP address of the
unit:
1.
Press the STATUS button on the front panel of the unit. The Status menu appears on the LCD display.
2.
Use the UP and DOWN navigational arrow buttons to navigate through the options until you locate the
All-In-One Presentation Switcher's IP address. Note the IP address for future reference.
You can use the Status Menu to verify current TCP/IP settings using the UP and
DOWN navigational buttons.

General Options

The WebConsole Configuration page contains settings that are accessible from each tab. FIG. 56 indicates the
universally accessible options available on the web pages.
FIG. 56 WebConsole Configuration page
The following table lists the general options for the WebConsole Configuration page:
General Options
Mute
Amp Volume
Refresh
Reset to Defaults
56
Reset to Defaults
Turns off the audio for the device.
Sets the output volume.
Click to reload all settings.
Click to reset the current page's settings to its factory default.
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Amp Volume and Mute
Refresh