Displaying Loop Protection Status; Displaying Information On The Spanning Tree; Displaying Bridge Status For Sta - AMX NXA-ENET8-2POE Operation/Reference Manual

Monitoring the NXA-ENET8-2POE

Displaying Loop Protection Status

Use the Loop Protection Status page (click Monitor, Loop Protection) to display loop protection
configuration settings and loop detection status.
FIG. 136 Loop Protection Status
Loop Protection Status parameters
• Port
• Action
• Transmit
• Loops
• Status
• Loop
• Time of Last Loop

Displaying Information On the Spanning Tree

Use the monitor pages for Spanning Tree to display information on spanning tree bridge status, the functional
status of participating ports, and statistics on spanning tree protocol packets.

Displaying Bridge Status for STA

Use the Bridge Status page to display STA information on the global bridge (i.e., this switch) and individual
ports.
FIG. 137 Bridge Status
Bridge Status parameters
STA Bridges
• MSTI
• Bridge ID
• Root ID
• Root Port
• Root Cost
164
Port Identifier.
The configured response to a detected loop. (Options: Shutdown Port, Shutdown
Port and Log, Log Only)
The configured active/passive protocol participation mode.
The number of loops detected on this port.
The operational port status (Up, Down, Disabled).
Whether a loop is currently detected on a port.
The time the last loop event was detected.
The Bridge Instance. This is also a link to the STP Detailed Bridge Status.
A unique identifier for this bridge, consisting of the bridge priority, and MAC
address (where the address is taken from the switch system).
The priority and MAC address of the device in the Spanning Tree that this switch
has been accepted as the root device.
The number of the port on this switch that is closest to the root. This switch com-
municates with the root device through this port. If there is no root port, then this
switch has been accepted as the root device of the Spanning Tree network.
The path cost from the root port on this switch to the root device. For the root
bridge this is zero. For all other bridges, it is the sum of the port path costs on the
least cost path to the root bridge.
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch