Configuring Port Remarking Mode; Showing The Qos Egress Port Tag Remarking Mode Used For Each Port - AMX NXA-ENET8-2POE Operation/Reference Manual

Configuring the NXA-ENET8-2POE
1.
Click Configuration, QoS, Port Shaper.
2.
Click on any enter under the Port field to configure the Port Scheduler and Shaper.

Configuring Port Remarking Mode

Use the QoS Egress Port Tag Remarking page to show an overview of QoS Egress Port Tag Remarking mode.
Click on any of the entries in the Port field to configure the remarking mode using classified PCP/DEI values,
default PCP/DEI values, or mapped versions of QoS class and drop priority.
FIG. 100 QoS Egress Port Tag Remarking

Showing the QoS Egress Port Tag Remarking Mode Used For Each Port

FIG. 101 Displaying Port Tag Remarking Mode
132 NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch