NXA-ENET8-2POE
NXA-ENET8-2POE Hardware Specifications (Cont.)
Standards
Physical Ports:
LEDs
Network Interface
Ports 1-8:
Ports 9-10:
PoE (IEEE 802.3at Power over Ethernet)
Max output power:
Total PoE budget:
Voltage:
PoE Output Voltage:
Power Requirements:
Power Consumption
Voltage:
Current:
Power Supply
Physical
Size (W x D x H)
Weight
Environmental
Temperature:
Humidity
6
• IEEE 802.3-2005
• Ethernet, Fast Ethernet, Gigabit Ethernet
• Full-duplex flow control
• Link Aggregation Control Protocol
• IEEE802.3at Power-over-Ethernet
• ISO/IEC 8802-3
• 8 10/100/1000BASE-T RJ-45 PoE ports
• 2 Gigabit Ethernet SFP slots (dual speed 100/1000BASE-X)
• System: PWR, DIAG, PoE
• Port: Status (Link, Speed, Activity)
RJ-45 connector, auto MDI/MDI-X:
• 10BASE-T: RJ-45 (100-ohm, UTP cable; Category 3 or better)
• 100BASE-TX: RJ-45 (100-ohm, UTP cable; Category 5 or better)
• 1000BASE-T: RJ-45 (100-ohm, UTP cable; Category 5, 5e or better)
Maximum cable length - 100 m (328 ft)
SFP transceiver slots:
100BASE-FX, 1000BASE-SX,1000BASE-LX, 1000BASE-LH, 1000BASE-T
The maximum length for fiber optic cable operating at Gigabit speed will depend
on the fiber type.
See the 1000 MBPS Gigabit Ethernet Collision Domain section on page 25 for
details.
Up to 30 W per port, within the total PoE power budget
75 W
Maximum current: 1.7A
48 V DC
• 75 Watts for PoE power (Max from AC inlet)
• 20 Watts for system power
• 100-240V
• 50-60Hz
• 1.5 A
• 1.5 A @ 110 VAC
• 0.75 A @ 220 VAC
• AC Power: 100 to 240 V, 50-60 Hz, 0.7A
• Power Supply: Internal, auto-ranging transformer: 100 to 240 VAC, 50 to 60
Hz
• Power Consumption: 100 Watts
• Maximum Current: 1.7A @ 100 VAC
33 x 20.4 x 4.3 cm (12.99 x 8.03 x 1.69 in.)
2.2 kg (4.85 lbs)
• Standard Operating: 0°C to 50°C (32°F to 122°F)
• Non-Operating (Storage): -40°C to 70°C (-40°F to 158°F)
10% to 90% (non-condensing)
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch