Displaying Information About Security Settings; Displaying Access Management Statistics; Usage Guidelines; Displaying Information About Switch Settings For Port Security - AMX NXA-ENET8-2POE Operation/Reference Manual

Monitoring the NXA-ENET8-2POE

Displaying Information About Security Settings

You can use the Monitor/Security menu to display statistics on management traffic, security controls for client
access to the data ports, and the status of remote authentication access servers.

Displaying Access Management Statistics

Use the Access Management Statistics page (click Monitor, System, Access Management Statistics) to view
statistics on traffic used in managing the switch.
FIG. 121 Access Management Statistics
Access Management Statistics parameters
• Interface
• Receive Packets
• Allow Packets
• Discard Packets

Usage Guidelines

Statistics will only be displayed on this page if access management is enabled on the Access Management
Configuration menu (see page 65), and traffic matching one of the entries is detected.

Displaying Information About Switch Settings For Port Security

Use the Port Security Switch Status page to show information about MAC address learning for each port,
including the software module requesting port security services, the service state, the current number of
learned addresses, and the maximum number of secure addresses allowed.
FIG. 122 Port Security Switch Status
150
Network protocols used to manage the switch. (Protocols: HTTP, HTTPS, SNMP,
TELNET, SSH)
The number of management packets received.
The number of management packets accepted.
The number of management packets discarded.
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch