Filtering Ip Addresses For Management Access - AMX NXA-ENET8-2POE Operation/Reference Manual

Configuring the NXA-ENET8-2POE


1.
Click Configuration, HTTPS.
2.
Enable HTTPS if required and set the Automatic Redirect mode.
3.
Click Save.

Filtering IP Addresses for Management Access

Use the Access Management Configuration page to create a list of up to 16 IP addresses or IP address groups
that are allowed management access to the switch through the web interface, or SNMP, or Telnet.
The management interfaces are open to all IP addresses by default. Once you add an entry to a filter list, access
to that interface is restricted to the specified addresses. If anyone tries to access a management interface on the
switch from an invalid address, the switch will reject the connection.
FIG. 43 Access Management Configuration
HTTPS Configuration parameters
• Mode
• Start IP Address
• End IP Address
• HTTP/HTTPS
• SNMP
• TELNET/SSH
1.
Click Configuration, Security, Switch, Access Management.
2.
Set the Mode to Enabled.
3.
Click Add new entry.
4.
Enter the start and end of an address range.
5.
Mark the protocols to restrict based on the specified address range.
6.
Click Save.
54
When you start HTTPS, the connection is established in this way:
The client authenticates the server using the server's digital certificate.

The client and server negotiate a set of security protocols to use for the connection.

The client and server generate session keys for encrypting and decrypting data.

The client and server establish a secure encrypted connection.

A padlock icon should appear in the status bar for Internet Explorer 5.x or above, and Mozilla
Firefox 2.0.0.0 or above.
The following web browsers and operating systems currently support HTTPS:
• Internet Explorer 5.0 or later
• Mozilla Firefox 2.0.0.0 or later
Enables or disables filtering of management access based on configured IP
addresses. (Default: Disabled)
The starting address of a range.
The ending address of a range.
Filters IP addresses for access to the web interface over standard HTTP, or over
HTTPS which uses the Secure Socket Layer (SSL) protocol to provide an
encrypted connection.
Filters IP addresses for access through SNMP.
Filters IP addresses for access through Telnet, or through Secure Shell which pro-
vides authentication and encryption.
Windows 98,Windows NT (with service pack 6a), Windows
2000, Windows XP, Windows Vista, Windows 7
Windows 2000, Windows XP, Windows Vista, Linux
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch