Displaying Log Details; Displaying Thermal Protection - AMX NXA-ENET8-2POE Operation/Reference Manual

System Log Information parameters (Cont.)
Display Filter
• with # entries per
page
Table Headings
• ID
• Level
• Time
• Message
1.
Click Monitor, System, Log.
2.
Specify the message level to display, the starting message ID, and the number of messages to display per
page.
3.
Use Auto-refresh to automatically refresh the page at regular intervals, Refresh to update system log
entries starting from the current entry ID, or Clear to flush all system log entries.
Use the arrow buttons to scroll through the log messages. |<< updates the system log entries, starting from
the first available entry ID, << updates the system log entries, ending at the last entry currently displayed,
>> updates the system log entries, starting from the last entry currently displayed, and >>| updates the
system log entries, ending at the last available entry ID.

Displaying Log Details

Use the Detailed System Log Information page to view the full text of specific log messages (click Monitor,
System, Detailed Log).
FIG. 114 Detailed System Log Information

Displaying Thermal Protection

Use the Thermal Protection Status page to show the thermal status for each port and the current chip
temperature (click Monitor, Thermal Protection).
FIG. 115 Thermal Protection Status
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch
The number of entries to display per page.
Error ID.
Error level as described above.
The time of the system log entry.
The message text of the system log entry.
Monitoring the NXA-ENET8-2POE
145