Table of Contents
Advertisement
Setting Up
1-22
04 Chapter 1
Connecting the Power Cord
The printer's input voltage rating is 120 VAC or 230 VAC.
Caution:
The manufacturer's nameplate on the back of the printer indicates
this rating. Confirm that the rated voltage of your printer matches
the voltage of your power outlet.
Warning:
!
For your safety, use only a properly grounded outlet. To avoid
possible electromagnetic interference or power supply problems, do
not use an extension cord.
22
1. Check that the printer is
turned off. The "O"-
marked side of the switch
should be depressed.
2. Plug the female end of the
power cord into the
connector on the left back
of the printer.
3. Plug the male end into a
wall outlet.
User's Manual
27.01.1999, 15:34 Uhr
Advertisement
Table of Contents
