Table of Contents
Advertisement
Operating
Environments
viii
03 Preface
• MarkVision™ by Lexmark for Windows 95/98/NT 4.0, printer
management utility programs, which allow you to easily understand
the printer (status, statistics, or features) and displays the printer
control panel on your computer display to remotely operate the
printer.
• Network Printer Utility for Windows 3.x, which allows you to
remotely change or confirm settings of Ethernet C or D board of
the printer or locally check the printer.
• PPMENU for MS-DOS, printer remote setup utility program,
which allows you to easily customize and program your printer to
your computer and software environments, using your computer
keyboard and display
The CD-ROM contains all items of the software but the floppy disks
contain printer drivers for Windows 3.1/3.11 and Windows 95/98
only.
To run a Printer Driver, you need an IBM PC/AT or PS/2 computer
or compatible running MS-Windows 3.1/3.11, MS-Windows 95/98,
MS-Windows NT 3.51, or MS-Windows NT 4.0.
To run MarkVision™, you need an IBM PC/AT or PS/2 computer
or compatible running MS-Windows 95/98 or MS-Windows NT
4.0, with at least 9MB of memory available on a hard disk, a CD-
ROM drive or a 3.5" double-sided high density (2HD) floppy disk
drive, and a VGA (640 × 480 dots) or higher resolution display.
To run the Network Printer Utility, you need an IBM PC/AT or PS/
2 computer or compatible running MS-Windows 3.1/3.11, with at
least 5MB of memory available on a hard disk, a CD-ROM drive or
a 3.5" double-sided high density (2HD) floppy disk drive, and a
VGA (640 × 480 dots) or higher resolution display.
To run PPMENU, you need an IBM PC/AT or PS/2 computer or
compatible running MS-DOS, with at least 1MB of memory
available on a hard disk, a CD-ROM drive or a 3.5" double-sided
high density (2HD) floppy disk drive, and a VGA (640 × 480 dots)
display. You must also be using PC-DOS version 5.02, MS-DOS
version 3.3, or higher version.
8
User's Manual
27.01.1999, 15:33 Uhr
Advertisement
Table of Contents
