Table of Contents
Advertisement
Error Indications
User's Manual
08 Chapter 5
Errors refer to a problem or condition which requires you to take
action. The printer shows errors by using the ERROR indicator and
the message display of the control panel. The following table lists the
error indications, explains causes, and suggests solutions.
Message
BD CYCLE ERROR
COMM.ERROR
COVER OPEN 1
COVER OPEN 2
COVER OPEN 3
FAN FAILURE n
FUSER FAILURE
INVALID SIMM
23
Causes and solutions
Cause: Malfunction in the laser unit
Solution: If the error recurs, consult your
dealer for service.
Cause: Communication error
Solution: Press the
CONT.
CONT.
select the correct settings of the serial
interface using the control panel setup
mode.
Cause: Incomplete closing of upper cover
Solution: Close the upper cover.
Cause: Incomplete locking of paper eject
unit
Solution: Lock the paper eject unit.
Cause: Incomplete insertion of the
optional duplex unit
Solution: Insert the duplex unit all the
way.
Cause: The following occurred:
: Malfunction in the fan of the power
1
supply
: Malfunction in the fan of the printer
2
mechanism
Solution: If the error recurs, consult your
dealer for service.
Cause: Malfunction in the fuser unit
Solution: If the error recurs, consult your
dealer for service.
Cause: Incorrect SIMM card installed
Solution: Press the
CONT.
CONT.
27.01.1999, 15:39 Uhr
Error Indications
SOLVING
PROBLEMS
button and
button.
5-23
Advertisement
Table of Contents
