Table of Contents
Advertisement
Action-required Status Indications and Printer Status Indications
Action-required
Status
Indications
Printer Status
Indications
5-26
08 Chapter 5
These conditions, not errors, require you to take action. The
following table lists the message indications, explains causes, and
suggests solutions.
Message
INSERT size
READY
TONER LOW
READY
REPLACE PARTS
Printer statuses refer to conditions which generally require no action
by you. The following table lists the printer statuses and explains
their meaning. It does not include messages in menu mode.
Message
FORM FEED
<<<INITIALIZE>>>
MENU RESET
26
Causes and solutions
Cause: Printer is ready for paper.
Solution: Put paper on the MFF. If paper
is already loaded, press
CONT.
CONT.
Cause: Toner runs short.
Solution: Prepare new toner bottle.
Cause: Print unit is near end.
Solutions: Replace print unit.
Note: Enter menu mode and select Clear
Warning. After replacement, be sure to
press
to perform Clear Warning.
ENTER
Meaning
The printer displays this message when you
press
with the DATA indicator
FORM FEED
off. The printer is printing data remaining
in buffer.
The printer is initializing. This message
appears whenever you turn on the printer,
close the upper cover, or lock the paper guide.
The printer displays this message when you
press
for five or more seconds.
RESET MENU
This reset returns parameter settings in the
menu to their factory defaults except for
interface settings as well as clears error
latches, buffered data, and temporary soft
fonts.
27.01.1999, 15:39 Uhr
.
User's Manual
Advertisement
Table of Contents
