Table of Contents
Advertisement
Handling Paper
2-34
05 Chapter 2
Important:
Use the ordinary paper mode (thick paper mode off) if paper thicker
than 90 g/m
2
(24 pound) does not have problems in fusing. With
thick paper mode on, large curl may result.
Caution:
Depending on conditions of paper surface, insufficient fusing may
occur even in thick mode. In this case, use paper with smooth surface.
General Precautions and Paper Storage
Observe the following when handling print media.
• When you purchase lots of paper, we recommend you to try
printing well some sample sheets in advance and make sure that
there is no printing problem.
• If transparencies or labels are printed, purchase these products
intended for laser printers. Since some of these products sold in the
market are not suitable for this printer, perform test printing in
advance.
• Use the multi-function feeder to print special paper like thick
paper, transparencies, labels, and envelopes. The print quality may
be inferior to plain paper.
• When special paper is used, the rear stacker can be used to
minimize paper curl. See "Using the Rear Stacker" in Chapter 2
for information on how to use the rear stacker.
Thick Paper
• Thick paper may not be printed normally if it curls too much.
Smooth the thick paper in advance to the extent that it curls up
within 2 mm.
• Do not load paper with one side printed into the multi-function
feeder for printing the other side. It stains paper.
34
User's Manual
27.01.1999, 15:36 Uhr
Advertisement
Table of Contents
