Table of Contents
Advertisement
User's Manual
08 Chapter 5
Upper cover
3. Put new sheets of paper on the feeder. If you want to continue
printing, load sheets of paper and adjust the left and right slide
guides to the width of paper.
4. Push the operation lever up. Push up the lever located at the
right of the multi-function feeder.
5. Clear the paper jam message. Open and close the upper cover to
clear the error message.
The table below contains advice on dealing with repeated paper feed
problems.
Problem
Paper does not feed cleanly
from paper tray
17
Clearing Paper Jams
2. Remove the jammed sheet.
Gently pull out the jammed
sheet from the feeder's
paper pick-up portion.
When the standard paper
tray is installed, first pull it
out about 5 cm, remove the
sheet, then return the paper
tray.
Causes and solutions
Top edge of paper stack may be
deformed (wavy or bent sheets). Try
turning the paper stack around.
Paper stack may not be aligned
properly. Pull out the tray,
straighten the paper stack against the
paper guides, and re-insert the tray.
Too many sheets in the paper stack.
Make sure the stack is level with or
below the limit mark on the left
paper guide.
The paper pressure plate may not be
released. Pull out the tray and insert
the tray again until it clicks up.
27.01.1999, 15:38 Uhr
SOLVING
PROBLEMS
5-17
Advertisement
Table of Contents
