Table of Contents
Advertisement
User's Manual
04 Chapter 1
Loading Paper in the Multi-function Feeder
The multi-function feeder (MFF) is useful to print a lot of thick or
nonstandard size paper of sheets. The MFF can automatically feed
sheets one by one to print continuously. Up to 100 sheets of paper
2
(64 kg/m
) can be loaded at a time in the multi-function feeder.
To set the multi-function feeder, follow these steps:
Caution:
The multi-function feeder can open at an angle of about 80°. To
avoid damage to it, do not apply excessive force on the paper tray or
do not put heavy things on it.
2. Lower the operation lever to the "open" position. Push down
the operation lever at the right of the multi-function feeder to the
"open" position.
Subguide
3. Pull out the subguides. Subguides are provided on the front of
the multi-function feeder for long sheets of paper and can be
extended in three stages depending on the length of paper used.
Extend the subguides according to the paper length.
19
1. Open the front cover. Put
fingers at the both top sides
of the front door and pull
the front door toward you.
Slide
guide
Operation lever
27.01.1999, 15:34 Uhr
Setting Up
GETTING
STARTED
1-19
Advertisement
Table of Contents
