Table of Contents
Advertisement
User's Manual
07 Chapter 4
Handling and Storing Print Units with Toner Bottles
This section provides notes on handling or storing print units with
toner bottles.
Notes on Handling
When handling a print unit, note the following:
• Do not expose the print unit to the direct sun light or strong light.
• Do not leave the print unit even under room light for five minutes
or more.
• If the print unit is removed from the printer, put it in its original
black bag for avoiding strong light, or wrap it in dust-proof paper
or cloth.
• If the print unit is moved from a cold area to a warm area, leave it
for one hour or more under room temperature before use.
• Do not place the print unit upright or upside down.
• Once a toner bottle is attached to the print unit, do not swing the
unit strongly or do not give it shock. Toner may spill.
• Do not touch the green surface of the photoconductor drum.
Notes on Storage
When storing a print unit, note the following:
• Do not unpack the print unit until it is actually used. If it is
unpacked accidentally, put it back in the original black bag and
store it.
• Store the print unit under the following environment free of the
direct sun light:
Temperature range: 0 to 40°C
Humidity range: 20 to 80% RH (no condensation)
• Do not store the print unit at a high temperature and humidity
environment.
• Do not store the print unit upright or upside down.
• Do not store the print unit near a magnetized component such as a
CRT screen, hard disk drive, or floppy disk.
• Keep the print unit out of reach of little children.
17
Periodic Routine Maintenance
27.01.1999, 15:37 Uhr
MAINTENANCE
4-17
Advertisement
Table of Contents
