Table of Contents
Advertisement
Error Indications
5-24
08 Chapter 5
Message
JOB TIMEOUT
LOAD MFF size
MANUAL TIMEOUT
MEMORY OVER FLOW
MOTOR FAILURE n
NO PROCESS UNIT
OVERRUN ERROR
PAPER JAM n
24
Causes and solutions
Cause: FPS job timeout (This error occurs
when the FPS emulation is active.)
Solution: Press the
CONT.
CONT.
Cause: Paper mismatch occurred. (MFF is
indicated even if the error occurred for a
paper tray.)
Solution: Set the specified MFF or tray to
the correct paper size specified.
Cause: Paper was not put on the MFF in
manual feed mode in the prescribed time.
(This error occurs when the FPS emulation
is active.)
Solution: Press the
CONT.
CONT.
Cause: Memory overflow error
Solution: Press the
CONT.
CONT.
Cause: Malfunction in the feed motor, etc.
Solution: If the error recurs, consult your
dealer for service.
1: Pick-up (printer body), 2: Register,
3: Photoconductor drum,
4: Pick-up (optional feeder units)
8: Duplex unit
Cause: No print unit is installed.
Solution: Install the print unit.
Cause: Incomplete in extracting
compressed data
Solution: Press the
CONT.
CONT.
Cause: Paper jam in the specified position
Solution: Clear the jammed paper from
the following area:
0: Pick roller, 1: Entry to paper path
2: Paper path, 3: Ejection from paper path
4: Duplex unit
27.01.1999, 15:39 Uhr
button.
button.
button.
button.
User's Manual
Advertisement
Table of Contents
