Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
Advertisement
Related Manuals for Fujitsu fi-7480
Summary of Contents for Fujitsu fi-7480
- Page 1 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS fi-7480 / fi-7460 CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTION fi-748PRB Imprinter CG00002-293601 Version A...
- Page 2 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS Consumable Replacement Procedure Pick Rollers Qty 2 Brake Roller Qty 1 Pick Roller Kit Part Name Part Number Remarks A shaft is not included in the Pick-Roller-Kit. When Pick-Roller-Kit PA03670-0002 replacing the pick roller, reuse the old Pick shaft.
- Page 3 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS REPLACING THE BRAKE ROLLER The Glass inside the ADF becomes very hot when the scanner is being used. Before you replace the consumables, turn off the power, unplug the power cable, and let cool for 15 minutes 1.
- Page 4 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 5. Attach a new brake roller on the Brake Roller Shaft Assembly a. Insert the Protrusion on the Brake Roller Shaft Assembly into the slot on the brake roller. 6. Attach the Brake Roller Shaft Assembly a.
-
Page 5: Replacing The Pick Roller
/ fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS Replacing the Pick Roller The Glass inside the ADF becomes very hot when the scanner is being used. Before you replace the consumables, turn off the power, unplug the power cable, and let cool for 15 minutes 1. - Page 6 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS c. Remove the Pick Shaft Assembly d. Hold and lift the bushing in the direction of the arrow below (1) e. Pull the bushing up in the direction of the arrow below (2)
- Page 7 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 6. Attach two (2) new pick rollers on the Pick shaft Assembly one at a time a. Insert the retaining clip of the pick roller into the slot b. Insert the retaining clip of the other pick roller into the slot Check that the pick rollers are attached properly.
- Page 8 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 7. Reinstall the Pick Shaft Assembly a. Insert the left end of the shaft into the slot and lower the other end gradually. b. Rotate the bushing on the pick shaft in the direction of the arrow below c.
- Page 9 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS If you find the counts are close to or over 200,000 and cleaning doesn’t resolve a feeding issue it might be time to replace the consumables. 1. Checking and resetting the Sheet Counters After Consumable Replacement a.
-
Page 10: Cleaning Instructions
/ fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS CLEANING INSTRUCTIONS The following table shows the specifications of consumables and their standard replacement cycle. It is recommended that you stock extra consumables before the ones in the scanner reach the end of their service life. -
Page 11: Cleaning The Scanner
/ fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE CANNER The Scanners Automatic Document Feeder (ADF) should be cleaned at least every 5000 pages. This is very dependent on the types of paper being scanner, when scanning documents with toner that has not fused will or have ink, the scanner may require more frequent cleaning. - Page 12 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 4. Clean the following parts with a dry lint free cloth or moistened with F1 [1] Cleaning the Brake Roller (x2) a. Remove the Brake Roller (Refer to ) b. Gently wipe off any dirt or dust along the grooves, taking care not to damage the roller...
- Page 13 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS [2] Cleaning the Pick Roller (x2) Gently wipe off any dirt along the grooves as you rotate the roller manually, taking care not to damage the roller surface. Make sure that it is wiped properly because black residue on the roller will affect the feeding performance.
- Page 14 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 5. Checking and resetting the Sheet Counters After Cleaning a. Start up the Software Operation Panel (SOP) b. From the listing on the left, Select “Device Setting” 1. Checking when to perform Cleaning 2.
- Page 15 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS Replacing the Print Cartridge (Consumable) for the Imprinter The Print Cartridge is replaced approx. 4,000,000 characters depending on the font or Every 6 months Check the expiration date on the package to make sure it hasn’t expired The install-by date is printed on the package of the print cartridge.
- Page 16 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 3. When using the imprinter for the first time, remove the tape on the print cartridge holder. 4. Lift the print cartridge holder by pinching the lever with your fingers as shown below.
- Page 17 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 7. Put the print cartridge into the holder with its tabs pointing to the right. Notice – be careful not to let the print cartridge catch the print circuit film 8. Lower the print cartridge holder gently until it locks in place.
- Page 18 / fi-7460 ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS 10. Close the print cartridge cover 11. If you replace the print cartridge, reset the ink counter after replacing the print cartridge. a. Using the Service Operation Panel see page 9 or 14 12.