Connecting The Power Cord - Fujitsu PRINTPARTNER User Manual

!
User's Manual

Connecting the Power Cord

This printer comes equipped with one of the two voltage ratings:
• 120 VAC (such as for the USA)
• 220 to 240 VAC (such as for Europe)
The manufacturer's nameplate on the back of the printer indicates
this rating. Confirm that the rated voltage of your printer matches
the voltage of your power outlet.
Warning:
For your safety, use only a properly grounded outlet. To avoid
possible electromagnetic interference or power supply problems, do
not use an extension cord.
Setting Up
1. Check that the printer is
turned off. The "O"-
marked side of the switch at
the right front of the printer
should be depressed.
2. Plug the female end of the
power cord into the
connector on the right
back of the printer.
3. Plug the male end into a
wall outlet.
GETTING
STARTED
1-15