User's Manual
04 Chapter 1
Stacker-full Sensor
This printer is equipped with a stacker-full sensor. If too much
paper is stacked on the paper stacker, the sensor detects it and
informs of an error.
Stacker-full sensor
If the following message is displayed, remove the paper on the paper
stacker.
STACKER FULL
Important:
If ejected paper curls upward, not so much paper can be stacked.
Remove paper little by little before the stacker-full sensor works.
5
Getting Acquainted
27.01.1999, 15:33 Uhr
GETTING
STARTED
1 - 5