Table of Contents
Advertisement
User's Manual
05 Chapter 2
• Labels that are stuck to a backing sheet with the glossy surface of
the backing sheet partially exposed and that are not prepared for
laser printers
Not usable
Glossy surface of
backing sheet
Paper Storage
Bad storage of paper may reduce quality of paper, resulting in poor
printing. Store paper correctly as referring to the following to keep
the paper in its best condition.
• Paper dislikes moisture. Store paper at a place free of water. Do not
open the paper package until you actually use the paper.
• If unpacked paper is left unused, repack it with the original packing
paper while taking care not to allow dust to enter, then store it at a
less-humid place.
• If you do not use the printer for a long time, remove paper from
the paper tray and repack it with the original packing paper, then
store it at a less-humid place.
• Store paper in a place not exposed in direct sun light and at low
humidity.
• Store paper on a level surface. Storage on the tilt may curl or
wrinkle paper.
• Do not pile up a great number of paper packages to avoid damage
to the paper. Do not put a heavy or hard thing on a paper package.
• Do not give paper sudden change in temperature to avoid dryness
and moisture absorption of the paper. Bring paper packages in the
place where the printer is used and leave them about a day before
unpacking.
37
Handling Paper
Usable
Labels covering the whole
surface of backing sheet
27.01.1999, 15:36 Uhr
PRINTING AND
PAPER HANDLING
2-37
Advertisement
Table of Contents
