Table of Contents
Advertisement
User's Manual
04 Chapter 1
Using the Rear Stacker
When the rear stacker is used, paper hardly curve inside the printer.
Therefore, it is suitable to print special types of paper such as thick
paper, transparencies, labels, and envelopes. When printing special
paper, use the rear stacker as follows:
Paper guide
Important:
The rear stacker cannot accommodate too much paper. Therefore,
when thick papers are printed, remove every four or five papers that
are ejected. When transparencies are printed, remove one by one
every time it is ejected.
21
Setting Up
1. Open the rear stacker. Put
your fingers in the dents
provided on the upper left
and right sides on the back
of the printer, then pull
open the rear stacker.
2. Attach the paper guide.
Prepare the paper guide
supplied with the printer,
then insert it into the holes
provided on the back of the
rear stacker.
27.01.1999, 15:34 Uhr
GETTING
STARTED
1-21
Advertisement
Table of Contents
