Table of Contents
Advertisement
Print Quality Problems
5-22
08 Chapter 5
What happened?
• Excess toner
smears.
PRINTER
• Bold characters
are shaded.
P
P
• The back side of
paper is smeary.
Important:
When replacing the print unit due to any troubles, reset the print
unit counter (whether or not the message display indicates
"
REPLACE PARTS
22
Typical case
What to investigate
• Print density is
• Adjust the print density.
not set
See "Adjusting Print
properly.
Density" in Chapter 1.
• The print units
• Replace the print units
are deteriorated
with new ones.
or damaged.
See "Replacing the print
unit" in Chapter 10.
• Print density is
• Adjust the print density.
not set
See "Adjusting Print
properly.
Density" in Chapter 1.
• The print units
• Replace the print units
are deteriorated
with new ones.
or damaged.
See "Replacing the print
unit" in Chapter 10.
• Separators of
• Use the cleaning sheets to
the fusing roller
clean the separators.
is contaminated.
See "Cleaning the Fuser
Unit Rollers" in this
chapter.
" regarding the print unit).
27.01.1999, 15:39 Uhr
User's Manual
Advertisement
Table of Contents
